How to Install Arduino IDE for Visual Studio extension

Here Visual Studio 2015 and Arduino IDE 1.6 as an example
這裡以Visual Studio 2015 和Arduino IDE 1.6 作為示範

When the 3D printing halfway fail, how to modify the g-code continue Print 當3D列印印到一半失敗,如何修改G-code接續列印

Sometimes we encounter half 3D printing fails.In fact, there are ways to save a part of the printing works.As long as the modification G-code can continue with Print
有時候會遇到3D列印時,列印到一半失敗,其實有辦法可以挽救列印一部份的作品，只要修改G-code就可以接續著列印

We start to understand the process
我們先來瞭解過程

Measure the height of already printed
量測已經列印的高度

know where to print
進而知道列印到哪裡

And then delete the code printed inside the G-code
再把G-code內已經列印的程式碼刪除

So the rest of the code is not part of 3D printing.
所以剩下的程式碼就是還沒3D列印的部分

Add LED kit to ATOM 2.0 3D Printer

I want to observe 3DP print quality.
But it was too dark, so I had the idea of transformation 3DP
Add LED kit to 3DP

We need the following parts

• White LED 3.2V *2
• DuPont head (2 pin) *1
• DuPont  pin *2
• 200 Ω Resistor *1 
• 0.25A Resistive Fuse *1
• LED kit  *1
• Heat shrink

We need the following tools

• Strippers
• Electric soldering iron
• Needle-nose pliers

Radar with Arduino

Radar with Arduino

arduino uno
HY-SRF05

How to use Arduino from MATLAB or Simulink

How to use Arduino from MATLAB or Simulink ?

1. Get Support Package
2. Download Arduino  Support Package

Download
MATLAB Support Package
 Simulink Support Package

1. log in Mathworks Account
2. Install  Arduino  Support Package

CR2016,Button cell,lithium battery

For a small group of topics, it needs to button-type battery, the voltage required 3V, buy the CR2016 Button cell.